• Quend Plates / QUEND 700, 960 Plate

Quend Plates
Quend 700 Plates
Quend 960 Plates

Quend Plates Suppliers, Quend® 700 High yield strength steel Plate Exporters, Quend 960 High Strength Structural Steel Plates Manufactures in Mumbai India.

Quenched and Tempered Steel Plates, QUEND® Plate, QUEND Grade 700 / 960 Plates.

Priminox Overseas is a well known trader and exporter of Quend Plates. Quend 700 is extra high strength structural steel produced as quenched and tempered with a minimum yield strength of 700 MPa. Quend 700 is recommended for the following applications like truck chassis, lifting and hoisting equipment, handling equipment and so on. Quend 960 is recommended for the following applications crane booms, lifting equipment, stabilising support, undercarriage, etc. The oxidized layer of our Quend Grade 960 Plates provides a better protection than the use of argon or high vacuum. These Quend Plates can be used at higher temperatures, where it further has good cold rolling properties. Crevice corrosion of these plates can occur in hot halide or sulfate solutions, which can be a consideration in marine applications.

Our Quend 960 Plate is delivered with a unique combination of excellent flatness, tight thickness tolerances and superior surface finish. In order to maintain a good weldability and laser cutting performance, a low zinc silicate primer is applied. Plates can also be delivered unpainted. The mechanical properties of Quend 700 Plates has been obtained by quenching ,tempering and the plate should not be used in applications requiring hot working and service temperatures above 550 °C.

Quend high yield strength steels plates Dealers, High Strength Structural Steel QUEND® Plates Distributors in Mumbai, EN 10025 Quend Plates, EN 10025 - S690QL / S890QL Quenched and Tempered Plates, Quend 700 Steel Plate Stockholders, Quend 960 Plates Manufactures in India

Quend Plate Specification

Type : Quend Plates
Grade : QUEND 700, QUEND 960
Thickness : 6-50 mm (0.24''- 2'')
Width : 1500-3100 mm (60-122'')
Length : 16 m (630'')

Dimensions

Grade Thickness Width
Quend 700 4–64 mm 1,500–3,100 mm
Quend 960 4–30 mm

Chemical Composition:

Grade Ladle analysis, % (max.)
C Si Mn P S Nb Cr V Ti Ni Al Mo N B
Quend 700 0.20 0.60 1.50 0.02 0.01 0.04 0.60 0.07 0.04 1.00 0.07 0.50 0.014 0.005
Quend 960 0.20 0.50 1.50 0.02 0.01 0.04 0.70 0.06 0.01 1.50 0.06 0.70 0.005 0.005

Tensile properties

Grade Transverse testing
Yield strength, Rp 0,2 Tensile strength, Rm Elongation, A5
Quend 700 700 MPa min. 780–930 MPa 14% min.
Quend 960 960 MPa min 980–1,150 MPa 12% min.

Impact toughness

Grade Minimum values at
0°C -20°C -40°C
Quend 700 35 J 30 J 27 J
Quend 960 35 J 30 J 27 J

Transverse testing according to EN 10025, option 30. For plate thickness <12 mm subsized Charpy V specimen are used.


Types of Quend Plates

Quend Plates

QUEND 700 Plates

QUEND 960 Plates

Quend high yield strength steels plates

High strength quenched and tempered steel plates

Quenched and Tempered Steel EN 10025 plate

Quend® 700 High yield strength steel Plate

Quend® 960 High yield strength steel Plates

Quend 960 High Strength Structural Steel Plates

Quend 700 High Strength Structural Steel Plates

EN 10025 - S690QL Quend Plates

EN 10025 Grade S890QL Quend Plates

Quend Steel Plate

Quend 700 Steel Plates

Quend 960 Steel Plate

Quend Grade Plates



Approved in The Following Top Refineries Across The Globe

SABIC Approved Quend Plate

SABIC (Saudi Arabia)

Saudi Aramco Approved Quend 700 Plate

Aramco (Saudi Arabia)

ALBA Approved Quend Plate

ALBA (Saudi Arabia)

QAFCO Approved Quend 960 Plate

QAFCO (Qatar)

Maaden Approved Quend Alloy Plate

MAADEN Saudi Arabia)

KNPC Approved Grade 700 Quend Plate

KNPC (Kuwait)


KOC Approved Grade 960 Quend Plate

KOC (Kuwait)

Qatar Petroleum Approved Quend Plate

Qatar Petroleum (Qatar)

PDO Approved Quend Grade 700 Plate

PDO (Oman)

ADNCO Approved Quend Plate

ADNCO (U.A.E.)

ORPIC Approved Quend Grade 960 Plate

ORPIC (Oman)

Takreer Approved Quend Plate

Takreer (Abu Dhabi)

YASREF Approved Quend Alloy Plate

YASREF (Saudi Arabia)

Petrobras Approved Quend Plate

PetroBras (Brazil)

PETRONAS Approved Quend 700 Plate

PETRONAS (Malaysia)

NIOC Approved Quend Plate

NIOC (Iran)

NPDC Approved Quend 960 Plate

NPDC (Nigeria)

EGPC Approved Quend Plate

EGPC (Egypt)



People Searched For

Quend Plates

Quend Plate Suppliers, High yield strength steel QUEND Plates Manufacture, Quend Plate Dealers, Buy Cheap Quend Plates, Quend Plate Distributors in Maharashtra, Low price Quend Plates Wholesalers, Quend 700® High Strength Plates, Quend Alloy 960 Plate, Quend Alloy 700 Plate, Quend Grade 700 Plates, Quend Grade 960 Plates, Quend 960® Quenched & Tempered Plates, Quend Plate Traders, Quend Grades Plates Stockists, Quend 700 Plates, Quend 960 Plates, Extra High Strength Structural Steel Quend plates Exporters in Mumbai India, Quend® Grade 700 and 960 Plates Manufactures in India


Domestic Suppliers and Exporters in Cities Like

Noida, Granada, Courbevoie, Lahore, Nagpur, Dammam, Melbourne, Kanpur, Ludhiana, Edmonton, Ho Chi Minh City, Atyrau, Vadodara, Jakarta, Rajkot, Abu Dhabi, La Victoria, Bogota, Secunderabad, Busan, Bhopal, Dubai, Doha, Al Khobar, Hong Kong, Vung Tau, Al Jubail, Toronto, Gimhae-si, Geoje-si, Mumbai, Jamshedpur, Bengaluru, Surat, New Delhi, Chennai, Baroda, Haryana, Karachi, Mexico City, Coimbatore, New York, Nashik, Algiers, Colombo, Pune, Sydney, Ulsan, Thiruvananthapuram, Aberdeen, Hanoi, Santiago, Thane, Moscow, Chandigarh, Kuala Lumpur, Sharjah, Caracas, Houston, Milan, Bangkok, Visakhapatnam, Seoul, Pimpri-Chinchwad, Petaling Jaya, Howrah, Ahmedabad, Kuwait City, Brisbane, Calgary, Manama, Jeddah, Chiyoda, Jaipur, Ranchi, Madrid, Montreal, Indore, Los Angeles, London, Ernakulam, Navi Mumbai, Perth, Muscat, Port-of-Spain, Rio de Janeiro, Gurgaon, Kolkata, Faridabad, Singapore, Istanbul, Cairo, Lagos, Tehran, Dallas, Ankara, Hyderabad, Ahvaz, Riyadh.

International Suppliers and Exporters in Countries Like

Singapore, Turkey, Iraq, Libya, Bhutan, Egypt, Mexico, Trinidad & Tobago,Tunisia, Denmark, Poland, Nigeria, Croatia, Belarus, Bolivia, Israel, Ghana, Jordan, Kenya, Austria, Switzerland, Puerto Rico, Spain, Estonia, Tibet, Brazil, Lebanon, Slovakia, Costa Rica, Czech Republic, United States, India, Japan, Mongolia, Bulgaria, Pakistan, Serbia, Kuwait, Afghanistan, Mexico, Gabon, Qatar, South Africa, Yemen, Poland, Algeria, Italy, Sri Lanka, Ireland, Malaysia, Greece, Canada, Norway, Namibia, New Zealand, Bangladesh, Gambia, Azerbaijan, Romania, Nigeria, Philippines, Bahrain, South Korea, Angola, Ukraine, Hong Kong, United Kingdom, Belgium, Iran, Chile, Thailand, Peru, Colombia, Saudi Arabia, Venezuela, Argentina, Morocco, China, Ecuador, Australia, Sweden, Zimbabwe, France, Netherlands, Portugal, Lithuania, Hungary, Russia, United Arab Emirates, Germany, Nepal, Oman, Chile, Finland, Iran, Vietnam, Kazakhstan, Taiwan, Indonesia, Macau.