• Low Temperature Carbon Steel ASTM A420 Grade WPL6

Low Temperature Carbon Steel Butt weld Pipe Fittings, Low Temp. Carbon Steel Forged Fittings, LTCS ASTM A420 Butt weld Fittings, Low Temp. Gr.WPL6 Forged Socket weld Fittings, Low Temperature Gr.WPL6 Pipe Fittings Suppliers, ASTM A105 LTCS Grade WPL6 High Pressure Forged Fittings Manufactures, LT Carbon Steel ASME SA420 Gr. WPL6 Seamless Pipe Fittings Stockist in Mumbai India.

ASME B16.11 Gr.WPL6 Low Temperature Forged Elbow, ASTM A420 Low Temp. Grade WPL6 Buttweld Reducer, LTCS in Grade WPL6 Fittings, Carbon Steel Low Temperature Grade WPL6 Threaded Fittings Suppliers, ASME SA105 Low Temp. CS Grade WPL6 Forged Tee, ANSI B16.9 Grade WPL6 Low Temp. Stub End Exporters.

Priminox Overseas is one of the prominent supplier, trader and stockist of ASTM A420 Carbon Steel Grade WPL6 Low Temperature Fittings, which is stabilized for weldments subject to sever corrosive conditions and service from 800 Degree F to 1600 Degree F. Our ASTM A420 Carbon Steel Grade WPL6 Low Temperature Pipe Fittings has high ductility, excellent drawing, forming, and spinning properties, which is further essentially non – magnetic and becomes slightly magnetic when cold worked. Low carbon content in this ASME SA 420 Carbon Steel Grade WPL6 Low Temperature Forged Fittings means less carbide precipitation in the heat - affected zone during welding and a lower susceptibility to inter - granular corrosion. Our ASTM A420 Carbon Steel Grade WPL6 Low Temperature Butt Weld Fittings is similar to other allots but with titanium amount of at least five times the level of carbon. This also helps advance the mechanical properties of this ASME SA 420 Carbon Steel Grade WPL6 Low Temperature Forged Threaded Fittings at higher temperatures, where after finishing; these are tested and inspected for pressure, temperature, weight. Our ASTM A420 Carbon Steel Grade WPL6 Low Temperature Forged Socket Weld Fittings demonstrates outstanding resistance to pitting, crevice corrosion stress cracking, and corrosion fatigue uniform corrosion. These ASME SA 420 Carbon Steel Grade WPL6 Low Temperature Butt Weld Pipe Fittings is substantially stronger than the common austenitic grades, with strength nearly twice that of different series of alloys.

LTCS ASTM A105 Gr.WPL6 Screwed Fittings, Grade WPL6 LT Carbon Steel Pipe Nipples Stockholders, Low Temp. Gr.WPL6 Forged Union Traders, Low Temperature Gr.WPL6 Cross, Coupling, Plug, Bushings, Stubends, Inserts, Pipe End Cap, Pipe Bends, End Cap Distributors

Carbon Steel A420 Gr.WPL6 Low Temperature Fittings Specification

Specifications : ASTM A105, A420 / ASME SA105, SA420
Dimensions : ASTM, ASME and API
Standard : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 / ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Size Range : 1/8” NB to 4” NB (Socketweld & Screwed-Threaded) / 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated).
Type : Socketweld Fittings, Screwed-Threaded Fittings / Seamless / Welded / Fabricated /
Forged Fittings Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Pipe Fittings Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS
Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Grade : Low Temperature Carbon Steel ASTM A420 Grade WPL6

Carbon Steel ASTM A420 LTCS Pipe Fittings
Carbon Steel Gr.WPL6 LTCS Forged Fittings
Low Temp. Grade WPL6 Forged and Pipe Fittings

ASTM A420 WPL6 LTCS Buttweld Pipe Fittings Specification

Grade Material Size Schedule Specification Item
Grade WPL6 Low Temperature Carbon Steel 200 NB
To
600 NB
Sch. 10
To
Sch. 80s
A-420 WPL 6 B/W Welded
ANSI B16.9
Bend
(Long & Short)
Elbow
(180o, 90o & 45o)
Tee
(Equal & Unequal)
Reducer
(Con & Ecc)
CAP
Stubend
(Long & Short)
Nipple (Barrel)

Chemical Composition

Grade C Mn P S SI Ni CR Mo Cu Cb V
Grade WPL6 0.3 0.050-1.35 0.035 0.04 0.15-0.40 0.4 0.3 0.12 0.4 0.02 0.08

Mechanical Properties

ASTM A420 Tensile Strength (KSI). Yield Strength (KSI)
Grade WPL3 60-95 35

Types of Low Temperature ASTM A420 Gr.WPL6 Forged and Pipe Fittings

Low Temperature Buttweld Pipe Fittings

Low Temperature Forged Socket Weld Fittings

Low Temp. Carbon Steel Forged Fittings

Low Temp. Carbon Steel Butt weld Fittings

LTCS A420 Grade WPL6 Pipe Fittings Suppliers

LTCS A105 Grade WPL6 Treaded Fittings Exporters

ASTM A420 Low Temp. Gr.WPL6 Seamless Pipe Fittings

ASTM A105 LTCS Gr.WPL6 High Pressure Forged Fittings

Grade WPL6 Low Temp. CS Buttweld Pipe Elbow

Grade WPL6 Low Temp. CS Forged Tee Dealer

ANSI B16.9 LTCS Gr.WPL6 Buttweld Reducer Stockholder

ANSI B16.11 LTCS Grade WPL6 Threaded / Screwed Union

Grade WPL6 Low Temp. CS Pipe End Cap Manufacturers

Gr.WPL6 Low Temp. CS Forged Couplings Distributors

ASME SA420 LT Carbon Steel Gr.WPL6 Pipe Nipple Supplier

ASME SA105 LT Carbon Steel Gr.WPL6 Bushings Stockist

ASME B16.28 LTCS Gr.WPL6 A105 Lap Joint Stub End

Low Temperature BS 3799 Forged Threaded Hex Plug

MSS-SP-43 LTCS Grade WPL6 Buttweld Reducing Nipple

A105 Gr.WPL6 Low Temp. MSS SP-79 Socket Weld Cross

Suppliers, Stockit and Distributors of World's Top 10 Manufacturers of Carbon Steel Fittings


Raccortubi Carbon Steel ASTM A420 Gr. WPL6 Butt weld Fittings

Raccortubi

Erne Fittings LTCS A420 Grade WPL6 Forged Fittings

Erne Fittings

Melesi Carbon Steel Pipe Fittings

Melesi

M.E.G.A LTCS A420 Grade WPL6 Threaded Fittings

M.E.G.A

ULMA Carbon Steel ASTM A420 Gr. WPL6 Socket Weld Fittings

ULMA

TecnoForge LTCS A420 Grade WPL6 Fittings

TecnoForge

BENKAN Carbon Steel ASTM A420 Gr. WPL6 Seamless Buttweld Pipe Fittings

BENKAN

BKL LTCS A420 Grade WPL6 Welded Pipe Fittings

BKL

Lame S.r.l. Carbon Steel ASTM A420 Gr. WPL6 Forged Fittings

Lame S.r.l.

Metalfar LTCS A420 Grade WPL6 Fittings

Metalfar



Approved in The Following Top Refineries Across The Globe

SABIC Approved Carbon Steel ASTM A420 Gr. WPL6 Butt weld Fittings

SABIC (Saudi Arabia)

Saudi Aramco Approved LTCS A420 Grade WPL6 Forged Fittings

Aramco (Saudi Arabia)

ALBA Approved Carbon Steel ASTM A420 Gr. WPL6 Pipe Fittings

ALBA (Saudi Arabia)

QAFCO Approved LTCS A420 Grade WPL6 Seamless Fittings

QAFCO (Qatar)

Maaden Approved Carbon Steel ASTM A420 Gr. WPL6 Fittings

MAADEN Saudi Arabia)

KNPC Approved LTCS A420 Grade WPL6 Threaded Fittings

KNPC (Kuwait)


KOC Approved Carbon Steel ASTM A420 Gr. WPL6 Socket Weld Fittings

KOC (Kuwait)

Qatar Petroleum Approved LTCS A420 Grade WPL6 Fittings

Qatar Petroleum (Qatar)

PDO Approved Carbon Steel ASTM A420 Gr. WPL6 Buttweld Pipe Fittings

PDO (Oman)

ADNCO Approved LTCS A420 Grade WPL6 Forged Fittings

ADNCO (U.A.E.)

ORPIC Approved Carbon Steel ASTM A420 Gr. WPL6 Seamless Buttweld Pipe Fittings

ORPIC (Oman)

Takreer Approved LTCS A420 Grade WPL6 Welded Pipe Fittings

Takreer (Abu Dhabi)

YASREF Approved Carbon Steel ASTM A420 Gr. WPL6 Fittings

YASREF (Saudi Arabia)

Petrobras Approved LTCS A420 Grade WPL6 Forged Fittings

PetroBras (Brazil)

PETRONAS Approved Carbon Steel ASTM A420 Gr. WPL6 Fittings

PETRONAS (Malaysia)

NIOC Approved LTCS A420 Grade WPL6 Butt weld Fittings

NIOC (Iran)

NPDC Approved Carbon Steel ASTM A420 Gr. WPL6 Fittings

NPDC (Nigeria)

EGPC Approved LTCS A420 Grade WPL6 Pipe Fittings

EGPC (Egypt)



People Searched For

ASME SA420 Grade WPL6 Low Temperature Carbon Steel Pipe and Forged Fittings

Low Temperature Carbon Steel Buttweld Pipe Fittings, Low Temp. Carbon Steel Forged Socket Weld Fittings, LTCS Buttweld Fittings, LTCS Forged Fittings, Low Temperature ASTM A420 Grade WPL6 Pipe Fittings Manufacturers in Mumbai, Gr.WPL6 Low Temp. Seamless Pipe Fittings, Low Temperature CS ASTM A105 Grade WPL6 High Pressure Forged Fittings, Low Temp. Carbon Steel Grade WPL6 Forged Elbow, Low Temperature Grade WPL6 Radius 1D, 2D, 3D, 5D, 6D, 8D, 10D Pipe Bend, A420 Grade WPL6 Low Temperature 45° Elbow Traders, LTCS Grade WPL6 Long Radius Elbow Supplier, Low Temp. Carbon Steel Short Radius Elbow Stockist, Carbon Steel Grade WPL6 LT. Socket Weld 90 Deg Elbow, ASME 16.11 A105 Carbon Steel Low Temp. Grade WPL6 Screwed 45 Degree Elbow, CS Gr.WPL6 Low Temperature Threaded / Screwed Union Stockist, Low Temperature Grade WPL6 Carbon Steel Fittings Supplier, LTCS Gr.WPL6 Forged Tee Dealers, Grade WPL6 LTCS Reducing Tee Exporters in India, ASTM A105 Grade WPL6 Low Temperature Carbon Steel Forged Equal Tee Stockist, ASME SA420 LT Carbon Steel Gr.WPL6 Unequal Tee Suppliers in Maharashtra, ANSI B16.9 LT Carbon Steel Gr.WPL6 A420 Butt weld Reducer, Grade WPL6 Low Temperature CS Concentric Reducer Wholesalers, ASTM A420 Gr.WPL6 LTCS Eccentric Reducer Stockist, Low Temp. Gr.WPL6 ASME B16.28 Stub Ends Stockholders, MSS SP-79 Carbon Steel Gr.WPL6 Low Temperature Threaded Cross Distributors, ASME SA420 LTCS Grade WPL6 Reducing Cross, Grade WPL6 Low Temperature ASTM A420 End Cap Exporter, Grade WPL6 Low Temp. Screwed Barrel Nipple, Low Temperature Grade WPL6 ASTM A105 Forged Caps, LTCS Grade WPL6 Socket Weld Half Coupling, Carbon Steel Gr.WPL6 Low Temperature BS 3799 Threaded Half Coupling Manufacturer, LTCS Gr.WPL6 Full Coupling, Low Temp. Grade WPL6 Threaded / Screwed Bushing, MSS-SP-43 Grade WPL6 Low Temperature Butt weld Pipe Nipple, Carbon Steel Low Temperature Gr.WPL6 SA105 Hex Nipples Stockyards, LTCS Grade WPL6 A420 Swage Nipple, ASME SA105 LTCS Grade WPL6 Screwed Hex Plug, Carbon Steel Low Temperature Gr.WPL6 A105 MSS SP-95 Square Plug in Mumbai India.


Domestic Suppliers and Exporters in Cities Like

Bangkok, Mexico City, Milan, Kuala Lumpur, Bhopal, Vadodara, Indore, Gimhae-si, Kuwait City, Hong Kong, Manama, Surat, Nagpur, Caracas, Pimpri-Chinchwad, Dallas, Ankara, Petaling Jaya, Chiyoda, Sydney, Baroda, Toronto, Ahvaz, Haryana, Navi Mumbai, Al Khobar, Dubai, Faridabad, Ahmedabad, Ranchi, Gurgaon, Los Angeles, Ludhiana, Mumbai, Chennai, Madrid, Bengaluru, Geoje-si, Seoul, Howrah, New Delhi, Busan, Calgary, Edmonton, Kanpur, Lahore, Aberdeen, Port-of-Spain, Kolkata, Hyderabad, Atyrau, Jaipur, Rio de Janeiro, Ulsan, Hanoi, Al Jubail, Sharjah, Abu Dhabi, Jeddah, Pune, Istanbul, Moscow, London, Cairo, Brisbane, Ho Chi Minh City, Jakarta, Coimbatore, Houston, Jamshedpur, Muscat, Thiruvananthapuram, Karachi, Ernakulam, Melbourne, Chandigarh, New York, Santiago, Secunderabad, Montreal, Riyadh, Vung Tau, Tehran, Bogota, Granada, Courbevoie, Doha, La Victoria, Algiers, Visakhapatnam, Dammam, Rajkot, Lagos, Thane, Colombo, Nashik, Singapore, Noida, Perth.

International Suppliers and Exporters in Countries Like

Brazil, Serbia, Estonia, Australia, Italy, Nigeria, Portugal, Bangladesh, Iran, Malaysia, Iran, Singapore, Bahrain, Qatar, Jordan, Zimbabwe, Ecuador, Yemen, China, Algeria, Mexico, Libya, Russia, Chile, Namibia, Czech Republic, Ireland, Israel, Norway, Poland, Hong Kong, Kenya, Vietnam, Bulgaria, Morocco, United Arab Emirates, Colombia, Indonesia, Nepal, South Korea, Finland, Trinidad & Tobago,Tunisia, Ukraine, Bolivia, Pakistan, Angola, United Kingdom, Lebanon, France, Belgium, Greece, Sri Lanka, Kazakhstan, Venezuela, Costa Rica, Sweden, Spain, South Africa, Tibet, Turkey, Thailand, Switzerland, Japan, Oman, Bhutan, Romania, Mexico, Egypt, Croatia, Belarus, New Zealand, Denmark, Chile, Austria, Peru, Mongolia, Poland, India, Macau, Gabon, Nigeria, Slovakia, Philippines, Taiwan, Netherlands, Ghana, Germany, Argentina, Azerbaijan, United States, Puerto Rico, Iraq, Kuwait, Saudi Arabia, Canada, Gambia, Lithuania, Afghanistan, Hungary.