• Titanium Gr.2 Flanges

Titanium Gr.2 Slip on Flanges
Titanium Grade 2 Blind Flanges
Titanium Weld-Neck Flange

Titanium Flanges, Ti Alloy Flange, Industrial Flanges, Gr.2 Flanges, Titanium Alloy Grade 2 Flanges Exporters, Ti Alloy Gr2 Slip On Flanges Stockist, Grade 2 Titanium Alloy Blind Flanges Suppliers, ASTM B381 Gr.2 Pipe Flanges Manufactures, Grade 2 ASME SB381 Weld-Neck Flanges Suppliers in Mumbai India.

ANSI B16.5 Titanium Grade 2 Socket weld Flanges, ASME 16.47 Titanium Alloy Grade 2 Plate Flanges, ASTM B381 Gr2 Titanium Ring Type Joint Flanges, Ti Alloy in Grade 2 Flanges, Ti Alloy Grade 2 WNRTJ EN-1092 Flanges, ASME SB381 Titanium Gr2 Orifice Flanges Exporters.

Priminox Overseas manufactures and exports Titanium Grade 2 Flanges, which is widely used in heat exchangers. Grade 2 Slip On Flanges is unalloyed titanium and what is considered as "commercially pure" titanium. Grade 2 Blind Raised Flanges is classified depending on the yield strength and allowable levels of the elements nitrogen, iron, carbon, and oxygen. Grade 2 Blind Spectacle Flanges is sometimes referred to as "CP 40" due to its approximate yield strength. Grade 2 Orifice Flanges is often used in military applications, medical devices, aircraft, spacecraft, highly stressed components such as connecting rods on expensive sports cars and some premium sports equipment and consumer electronics.

>Grade 2 Lap Joint Flanges is stress relived by holding at 1004 Degree F to 1103 Degree F (540 Degree C to 595 Degree C) for 15 minutes to 30 minutes, and then air cool. Continuous service temperatures in Grade 2 Ring Type Joint Flanges can reach up to 800 Degree F with occasional, intermittent service at 1000 Degree F. These Grade 2 Weld Neck Flanges offers best strength to weight ratio of any corrosion resistant material. Grade 2 Socket Weld Flanges is also used in Chemical processing, Dimensional stable anodes, Chlorate manufacturing, Desalination, Architecture, etc. In the majority of these and other engineering applications, these Grade 2 Titanium Pipe Flanges has replaced heavier, less serviceable or less cost - effective materials.

Titanium Gr.2 ANSI B16.5 BLRF Flanges, Ti Alloy Grade 2 ANSI B16.48 WNFF Flanges, DIN 3.7035 Titanium Alloy SORF Flanges Stockholders, UNS R50400 Titanium Reducing Flanges, Ti Alloy Gr.2 Long Weld Neck Flanges, Titanium Gr.2 Spectacle Blind Flanges, Ti Alloy Grade 2 BS4504 Lap Joint Flanges, Titanium Gr.2 Class 1500# SOFF Flanges, Titanium Gr2 Raised Face Flanges Distributors.

Grade 2 Titanium Flanges Specification

Specifications : ASTM B381, ASME SB381
Dimensions : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
Size : 1/2" (15 NB) to 48" (1200NB)
Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Grade : Titanium Gr.2 UNS (R50400), DIN (3.7035)

Equivalent Grade

Titanium Gr 2 R50400 3.7035

Chemical Composition

Grade C N O H Ti Fe
Ti Gr 2 0.10 max 0.03 max 0.25 max 0.015 max Bal 0.30 max

Mechanical Properties

Tensile strength (min) 0.2% yield strength (min)
Designation MPa ksi MPa ksi
Unalloyed grades    
grade 2 340 50 280 40

Types of Titanium Gr.2 Flanges

Titanium Flanges

Titanium Pipe Flanges

Titanium Flange Suppliers

Titanium Industrial Flanges

Titanium Gr.2 RTJ Flanges

Titanium Gr.2 Plate Flanges

ASTM B381 Ti Alloy Gr2 Blind Flanges Suppliers

ASME SB381 Ti Alloy Gr2 Slip On Flanges Exporters

Grade 2 Titanium Alloy Orifice Flanges Dealer

Grade 2 Titanium Alloy Socket weld Flanges

ANSI B16.5 Ti Alloy Gr.2 WNRTJ Flanges Stockholder

ANSI 16.47 Ti Alloy Gr.2 SORF Flanges Distributors

DIN 3.7035 Titanium Alloy BLRF Flanges

UNS R50400 Titanium Alloy SOFF Flanges

Ti Alloy Grade 2 BS10 Lap Joint Flanges

Ti Alloy Grade 2 ANSI B16.5 Square Flanges

Ti Gr.2 B381 WNRF (Weld Neck Raised Face) Flange

SB381 Ti Gr.2 Threaded Forged Flanges Stockist

ASME B16.47 Titanium Grade 2 Reducing Flanges Supplier

ANSI B16.48 Titanium Grade 2 Long Weld Neck Flange

Ti Alloy Gr.2 Spectacle Blind Flanges Manufacturer

Ti Alloy Grade 2 Ring Type Joint Flanges

Titanium Grade 2 Lap Joint Flanges Stockist

Grade 2 Titanium Alloy Square Flanges

Ti Alloy Grade 2 Tongue & Groove Flanges

Ti Alloy Grade 2 EN-1092 Raised Face Flanges

Titanium Gr.1 / 7 / 9 / 12 Flanges

Titanium Gr.5 Flanges

Approved in The Following Top Refineries Across The Globe

SABIC Approved Titanium Alloy Gr 2 Flanges

SABIC (Saudi Arabia)

Saudi Aramco Approved Titanium Gr 2 Flanges

Aramco (Saudi Arabia)

ALBA Approved Titanium Alloy Gr 2 Flanges

ALBA (Saudi Arabia)

QAFCO Approved Titanium Gr 2 Flanges

QAFCO (Qatar)

Maaden Approved Titanium Gr 2 Flanges

MAADEN Saudi Arabia)

KNPC Approved Titanium Gr 2 Flanges

KNPC (Kuwait)

KOC Approved Titanium Alloy Gr 2 Flanges

KOC (Kuwait)

Qatar Petroleum Approved Titanium Gr 2 Flanges

Qatar Petroleum (Qatar)

PDO Approved Titanium Gr 2 Flanges

PDO (Oman)

ADNCO Approved Titanium Alloy Gr 2 Flanges


ORPIC Approved Titanium Gr 2 Flanges

ORPIC (Oman)

Takreer Approved Titanium Gr 2 Flanges

Takreer (Abu Dhabi)

YASREF Approved Titanium Alloy Gr 2 Flanges

YASREF (Saudi Arabia)

Petrobras Approved Titanium Gr 2 Flanges

PetroBras (Brazil)

PETRONAS Approved Titanium Gr 2 Flanges

PETRONAS (Malaysia)

NIOC Approved Titanium Alloy Gr 2 Flanges

NIOC (Iran)

NPDC Approved Titanium Gr 2 Flanges

NPDC (Nigeria)

EGPC Approved Titanium Alloy Gr 2 Flanges

EGPC (Egypt)

People Searched For

Titanium Gr.2 Flanges

Titanium Flanges, Ti Alloy Flange, Titanium Industrial Flanges, Titanium Grade 2 Flanges, Ti Alloy Gr.2 Flanges Manufacturers in Mumbai, UNS R50400 Titanium Alloy Slip On Flanges Supplier, Titanium Gr.2 Blind Flanges, Ti Alloy Grade 2 Plate Flanges, Titanium Gr.2 Pipe Flanges, Grade 2 Titanium Alloy Flat Flanges, Titanium Alloy Gr2 Orifice Flanges, Grade 2 Ti Alloy Socket weld Flanges, ANSI B16.48 Titanium Gr.2 WNRTJ Flanges, Titanium Gr2 Threaded / Screwed Flanges Stockist, Grade 2 Titanium Alloy Flanges Supplier, DIN 3.7035 Ti Alloy SORF Flanges Dealers, Titanium Gr.2 BS4504 BLRF Flanges Stockist, ASME / ASTM B381 Ti Alloy Grade 2 Flanges Suppliers in Maharashtra, ANSI B16.5 Titanium Gr.2 BS10 SOFF Flanges, Titanium Grade 2 EN-1092 WNFF (Weld Neck Face Flanges) Wholesalers, ASTM B381 Grade 2 Titanium Weld-Neck Flange Stockist, Ti Alloy Gr.2 ASME Reducing Flanges Stockholders, Gr2 Titanium Long Weld Neck Flanges Distributors, Grade 2 ASME SB381 Titanium Spectacle Blind Flanges, Titanium Gr.2 ASTM B381 Ring Type Joint Flanges Exporter, Grade 2 Titanium Lap Joint Flanges, Titanium Gr.2 B381 Square Flanges, Ti Alloy Grade 2 ASME B16.47 Tongue & Groove Flanges, Titanium Gr.2 WNRF Flanges Manufacturer, Titanium Grade 2 Threaded Flanges, Titanium Alloy Gr2 Screwed Flanges, Titanium in Grade 2 JIS, AS, SA, MSS, AFNOR, UNI, GOST, AWWA Flanges Stockyards, Ti Alloy Gr.2 AISI Flanges, Titanium Gr.2 DIN Flanges, Ti Alloy Grade 2 BS Flanges, Gr2 Titanium EN Flanges Exporters in India, Titanium Gr.2 Loose Plate With Weld Neck Flange, Titanium Grade 2 Hubbed Slip on Flange, Ti Alloy Grade 2 Plate Slip-On Flanges, Ti Alloy Gr2 SB381 Screwed Boss Flange Dealer, Titanium Gr.2 Slip-On Boss Flange, ASME SB381 Titanium Grade 2 Lapped Pipe End Flanges, ASTM B381 Ti Alloy Gr2 Raised Face Flanges, Ti Gr.2 Hubbed Threaded Flange in Mumbai India.

Domestic Suppliers and Exporters in Cities Like

Algiers, Chandigarh, Doha, Bangkok, Ranchi, Rajkot, Al Khobar, Ho Chi Minh City, Nagpur, Courbevoie, Hyderabad, Kolkata, Calgary, Ernakulam, Madrid, Pimpri-Chinchwad, Los Angeles, Kuala Lumpur, Geoje-si, Secunderabad, Lahore, Surat, Navi Mumbai, Baroda, La Victoria, Mumbai, Visakhapatnam, Atyrau, Jaipur, Pune, Lagos, Caracas, Howrah, Kanpur, Port-of-Spain, Faridabad, Ludhiana, Milan, Bogota, Istanbul, Colombo, Edmonton, Dammam, Cairo, Aberdeen, Vadodara, Mexico City, New Delhi, Perth, Al Jubail, Dubai, Melbourne, Chennai, Tehran, Bhopal, Jeddah, Noida, Sydney, New York, Muscat, Busan, Manama, Granada, Chiyoda, Riyadh, Thane, Gimhae-si, Hanoi, Dallas, Thiruvananthapuram, Sharjah, Haryana, Vung Tau, Gurgaon, Karachi, Brisbane, Rio de Janeiro, Ulsan, London, Seoul, Toronto, Petaling Jaya, Abu Dhabi, Ankara, Nashik, Jakarta, Jamshedpur, Houston, Ahvaz, Santiago, Hong Kong, Bengaluru, Moscow, Montreal, Singapore, Kuwait City, Ahmedabad, Indore, Coimbatore.

International Suppliers and Exporters in Countries Like

Kenya, Norway, Libya, Netherlands, Singapore, Bahrain, New Zealand, Vietnam, Macau, Lithuania, Iran, Malaysia, Austria, Kazakhstan, Kuwait, Lebanon, Italy, Romania, South Korea, Morocco, Jordan, Taiwan, Algeria, Philippines, United States, Iraq, Egypt, Nigeria, Sri Lanka, United Arab Emirates, Azerbaijan, Croatia, Bulgaria, Ghana, Poland, Ecuador, Belarus, China, Pakistan, Bolivia, Saudi Arabia, Trinidad & Tobago,Tunisia, Nigeria, Qatar, Ireland, Turkey, Zimbabwe, Estonia, Hong Kong, Greece, South Africa, Namibia, Venezuela, Puerto Rico, Nepal, Belgium, Germany, Bangladesh, United Kingdom, Switzerland, Peru, Poland, Mexico, Finland, Thailand, Israel, Serbia, Yemen, Denmark, Hungary, Mongolia, Brazil, Costa Rica, Oman, Afghanistan, Sweden, Gambia, Russia, India, France, Angola, Indonesia, Australia, Argentina, Mexico, Chile, Japan, Spain, Canada, Colombia, Ukraine, Iran, Czech Republic, Chile, Slovakia, Gabon, Portugal, Bhutan, Tibet.