Alloy K500 Perforated Sheet Stockists, Monel K500 Chequered Plates, ASTM B127 Alloy K-500 Cold Rolled Coil Suppliers, Monel K500 Shim Sheets Manufactures, K500 Monel Coil Roll, Monel® K500 Flat-Rolled Plates, Monel K-500 Plain Sheets, DIN 2.4375 Monel Hot Rolled Plates, Nickel Alloy UNS N05500 Sheets, Plates and Coils Exporters in Mumbai India.
Monel K500 Slit Coils, ASME SB127 Monel Alloy Plates, ASTM B127 Monel Sheets.
Priminox Overseas is a prominent exporter and manufacturer of Alloy K500 Sheets Plates Coils, which has found to be resistant to a sour - gas environment. These Monel K500 Plates combines the corrosion resistance of Monel 400 but gives the added advantage of extra strength and hardness (as a result of its age hardening ability). The increased properties are obtained by adding aluminum and titanium to the nickel - copper Monel K500 Coils, and by heating under controlled conditions so that submicroscopic particles are precipitated during the course of the matrix. Our Alloy K500 Plates is used for pump shafts, doctor blades and scrapers, oil - well tools and instruments, springs, valve trim, fasteners, and marine propeller shafts. For propeller shafts, these Alloy K500 Coils is used for high strength (resulting in smaller diameter shafts and thus smaller bearings) and resistance to seawater. Low corrosion rates in sea water make our Nickel-Alloy K500 Sheets suitable for marine service although pitting may occur in stagnant waters but the rate of pitting slows after initial attack. These Nickel-Alloy K500 Plates is non - magnetic and should be annealed when welded and the weldment then stress relieved before aging. However, it is possible to develop a magnetic layer on the surface of our Monel UNS N05500 Sheets during processing. Electrical resistivity is markedly influence by thermal history because of the age - hardening characteristics of these Monel Din 2.4375 Plates.
Monel K500 Rolls, ASTM B127 Alloy K500 Flat, Monel K500 Circles Distributors, Nickel Alloy UNS N05500 Coils, Type K500 Monel Rings Stockholders, Monel Alloy K-500 Foils, Monel K500 Cold Rolled Sheets, Monel DIN 2.4375 Blank, Monel K500 Profile, Monel® K500 Plates, Monel K-500 Strip Traders in Mumbai.
Monel K500 Sheet, Plate & Coil
Specifications : ASTM B127 / ASME SB127
Standard : ASTM, ASME and API
Size: 15NB to 150NB In
Thickness : 1.0mm – 200mm
Production : Hot-Rolled (HR) / Cold-Rolled (CR)
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Equivalent Grade
STANDARD | UNS | WNR. |
Monel K500 | N05500 | 2.4375 |
Chemical Composition
Ni | C | Al | Mn | Si | Fe | Cu | S |
63.0 min | 0.3 max | 0.50 max | 2.0 max | 0.5 max | 1.0 - 2.5 | 28.0 - 34.0 | 0.02 max |
Mechanical Properties
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 115000 , MPa – 790 | Psi – 160000 , MPa – 1100 | 20 % |
Types of Monel® K500 Sheets, Plates and Coils |
|
Monel K-500 Sheets |
K500 Monel Plates |
ASME SB127 Alloy K500 Coils |
Monel K500 Perforated Sheet |
ASTM B127 Monel K500 Shim Sheets |
DIN 2.4375 Hard Tempered Sheet & Coil |
UNS N05500 Monel Chequered Plates |
Monel K500 Industrial Coils |
Monel Alloy K-500 Foils |
Monel K500 Cold & Hot Rolled Strip |
Nickel Alloy N05500 Strips |
Monel K500 Hot Rolled Plates |
Monel K500 CR Sheet Coil |
Monel K500 Coil Roll |
Suppliers, Stockist and Distributors of World's Top 10 Manufacturers of Monel Sheets, Plates and Coils

Outokumpu

Nippon Steel

Aperam

Baosteel

Jindal Stainless

POSCO

Arcelor Mittal

ThyssenKrupp

Acerinox

SAIL

Tisco

NAS
Approved in The Following Top Refineries Across The Globe

SABIC (Saudi Arabia)

Aramco (Saudi Arabia)

ALBA (Saudi Arabia)

QAFCO (Qatar)

MAADEN Saudi Arabia)

KNPC (Kuwait)

KOC (Kuwait)

Qatar Petroleum (Qatar)

PDO (Oman)

ADNCO (U.A.E.)

ORPIC (Oman)

Takreer (Abu Dhabi)

YASREF (Saudi Arabia)

PetroBras (Brazil)

PETRONAS (Malaysia)

NIOC (Iran)

NPDC (Nigeria)

EGPC (Egypt)
People Searched For
Monel K500 Sheets, Plates Coils
Monel Sheets, Monel Plates, Monel Coils, Monel K500 Sheets Plates Coils, Alloy K500 Sheet, Alloy UNS N05500 Monel Plates Suppliers in Mumbai, Monel K500 Coils, Monel Alloy K500 Shim Sheets, ASTM B127 Monel Sheet & Coils, ASME SB127 Monel Plates Price, Monel® K500 Plain Sheets, Monel Alloy K-500 Chequered Plates, Monel K500 Slit Coils, K500 Monel CR Plates, Monel K500 Cold Rolled Sheets Exporters in India, Nickel Alloy UNS N05500 Perforated Sheets, DIN 2.4375 Monel® Rolled Floor Plates, Monel K-500 HR Hot Rolled Coils, Monel K500 Rolled Floor Plates, Monel K500 Slitting Coils, Dealers in Maharashtra, Monel K500 Cold Rolled CR Coil Stockists in Mumbai, Monel K500 Sheet thickness, UNS N05500 Sheets, Monel K500 Perforated Coils, Monel K500 Diamond Plates, Monel® K500 Industrials Coils, ASTM B127 / ASME SB127 Monel Plates in Grade K500, Industrials Monel Sheets, Monel K500 Foils, Monel K500 Rolls, Monel Alloy K500 Rings, Alloy N05500 Circles, Monel K500 Blanks, Type K-500 Monel Profile, B127 Monel K500 Flats, Monel K500 Sheets, Plates and Coils, Monel K-500 Strip Manufacture in Mumbai India.