• Monel K500 Flanges

Monel K500 Flanges, K500 Alloy Flanges, Monel® K500 Industrial Flanges, Nickel Alloy K500 ASME SB564 Weld-Neck Flanges Suppliers, Monel Alloy K500 Flanges Exporters, K500 Monel Alloy Blind Flanges Suppliers, ASTM B564 Monel K500 Pipe Flanges Manufactures, Monel® Alloy K500 Slip On Flanges Stockist in Mumbai India.

ASME 16.47 Monel Alloy K500 Plate Flanges, ASTM B564 K500 Monel Ring Type Joint Flanges, ANSI B16.5 Monel K500 Socket weld Flanges, ASME SB564 Monel® K500 Orifice Flanges Exporters, Monel® Alloy in Grades K500 Flanges, Alloy K500 WNRTJ EN-1092 Flanges.

Priminox Overseas is a prominent exporter and manufacturer of Alloy K500 Flanges, which can be further strengthened by cold working before the precipitation hardening. Monel K500 Slip On Flanges finds wide applications in the marine, chemical, petrochemical and shipbuilding industries. The increased properties are obtained by adding aluminum and titanium to the nickel-copper base of Monel K500 Blind Raised Flanges, and by heating under controlled conditions so that particles of Ni3 (Ti, Al) are precipitated throughout the matrix. Monel K500 Blind Spectacle Flanges can be supplied in half hard a full hard temper, where its Melting Point is 2460 Degree F (1350 Degree C) approx. The addition of aluminum and titanium to an already robust Monel K500 Lap Joint Flanges adds strength and hardness. The corrosion resistance of Monel K500 Ring Type Joint Flanges is virtually the same as Alloy 400 with exception when in the age - hardened condition. Marine Applications for Monel K500 Orifice Flanges: Centrifugal pumps, Pump shafts & impellers, Valve & shaft components, Cables, Fasteners, Chains, Springs, etc. When in the age-hardened condition, Monel K500 Socket Weld Flanges has a greater tendency toward stress-corrosion cracking in some environments. Monel UNS N05500 Flanges has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Monel Din 2.4375 Pipe Flanges is precipitation - hardenable nickel - copper alloy that combines the corrosion resistance of MONEL alloy 400 with greater strength and hardness.

UNS N05500 Monel® Reducing Flanges, Alloy K500 Long Weld Neck Flanges, Monel K500 Spectacle Blind Flanges, Monel K500 ANSI B16.5 BLRF Flanges, Monel K500 Class 1500# SOFF Flanges, Monel K500 Raised Face Flanges Distributors, Nickel Alloy K500 ANSI B16.48 K500 WNFF Flanges, DIN 2.4375 Monel Alloy SORF Flanges Stockholders, Monel® Alloy K500 BS4504 Lap Joint Flanges.

K500 Monel Flanges Specification

Specifications : ASTM B564, ASME SB564
Dimensions : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
Size : 1/2" (15 NB) to 48" (1200NB)
Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Grade : Monel K500 UNS (N05500), DIN (2.4375)

Monel K500 Slip on Flanges
Monel K500 Blind Flanges
Monel Weld-Neck Flange

Equivalent Grade

STANDARD UNS WNR.
Monel K500 N05500 2.4375

Chemical Composition

C Mn Si S Cu Fe Ni
0.25 max 1.5 max 0.5 max 0.010 max 27.00 – 33.00 0.5 – 2 63.00 min

Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.44 g/cm3 1350 °C (2460 °F) Psi – 115000 , MPa – 790 Psi – 160000 , MPa – 1100 20 %

Types of Monel K500 Flanges

Monel K500 Flanges

Monel K500 Pipe Flanges

K500 Loose Flange Suppliers

K500 Monel Industrial Flanges

Monel K500 RTJ Flanges

Monel K500 Plate Flanges

ASTM B564 Alloy K500 Blind Flanges Suppliers

ASME SB564 Alloy K500 Slip On Flanges Exporters

K500 Nickel Alloy Orifice Flanges Dealer

K500 Nickel Alloy Socket weld Flanges

ANSI B16.5 Alloy K500 WNRTJ Flanges Stockholder

ANSI 16.47 Alloy K500 SORF Flanges Distributors

DIN 2.4375 Monel® Alloy BLRF Flanges

UNS N05500 Monel® Alloy SOFF Flanges

Monel Alloy K500 BS10 Lap Joint Flanges

Monel Alloy K500 ANSI B16.5 Square Flanges

Alloy K500 B564 WNRF (Weld Neck Raised Face) Flange

SB564 Alloy K500 Threaded Forged Flanges Stockist

ASME B16.47 Monel® K500 Reducing Flanges Supplier

ANSI B16.48 Monel® K500 Long Weld Neck Flange

Monel® K500 Spectacle Blind Flanges Manufacturer

Monel® Alloy K500 Ring Type Joint Flanges

Monel K500 Lap Joint Flanges Stockist

K500 Nickel Alloy Square Flanges

Monel® Alloy K500 Tongue & Groove Flanges

Nickel Alloy K500 EN-1092 Raised Face Flanges



Approved in The Following Top Refineries Across The Globe

SABIC Approved Monel Alloy K500 Flanges

SABIC (Saudi Arabia)

Saudi Aramco Approved Monel K500 Flanges

Aramco (Saudi Arabia)

ALBA Approved Monel Alloy K500 Flanges

ALBA (Saudi Arabia)

QAFCO Approved Monel K500 Flanges

QAFCO (Qatar)

Maaden Approved Monel K500 Flanges

MAADEN Saudi Arabia)

KNPC Approved Monel K500 Flanges

KNPC (Kuwait)


KOC Approved Monel Alloy K500 Flanges

KOC (Kuwait)

Qatar Petroleum Approved Monel K500 Flanges

Qatar Petroleum (Qatar)

PDO Approved Monel K500 Flanges

PDO (Oman)

ADNCO Approved Monel Alloy K500 Flanges

ADNCO (U.A.E.)

ORPIC Approved Monel K500 Flanges

ORPIC (Oman)

Takreer Approved Monel K500 Flanges

Takreer (Abu Dhabi)

YASREF Approved Monel Alloy K500 Flanges

YASREF (Saudi Arabia)

Petrobras Approved Monel K500 Flanges

PetroBras (Brazil)

PETRONAS Approved Monel K500 Flanges

PETRONAS (Malaysia)

NIOC Approved Monel Alloy K500 Flanges

NIOC (Iran)

NPDC Approved Monel K500 Flanges

NPDC (Nigeria)

EGPC Approved Monel Alloy K500 Flanges

EGPC (Egypt)



People Searched For

Monel K500 Flanges

Monel K500 Flanges, Monel® K500 Industrial Flanges, Monel® K500 Flanges, Alloy K500 Flanges Manufacturers in Mumbai, UNS N05500 Monel Alloy Slip On Flanges Supplier, Monel K500 Blind Flanges, Monel® Alloy K500 Plate Flanges, Monel K500 Pipe Flanges, K500 Nickel Alloy Flat Flanges, Monel Alloy K500 Orifice Flanges, K500 Alloy Socket weld Flanges, ANSI B16.48 Monel® K500 WNRTJ Flanges, Monel K500 Threaded / Screwed Flanges Stockist, K500 Monel Alloy Flanges Supplier, DIN 2.4375 Monel® Alloy SORF Flanges Dealers, Monel K500 BS4504 BLRF Flanges Stockist, ASME / ASTM B564 Nickel Alloy K500 Flanges Suppliers in Maharashtra, ANSI B16.5 Monel K500 BS10 SOFF Flanges, Monel K500 EN-1092 WNFF (Weld Neck Face Flanges) Wholesalers, ASTM B564 K500 Alloy Weld-Neck Flange Stockist, Monel® Alloy K500 ASME Reducing Flanges Stockholders, K500 Alloy Long Weld Neck Flanges Distributors, K500 ASME SB564 Monel Spectacle Blind Flanges, Monel® K500 ASTM B564 Ring Type Joint Flanges Exporter, K500 Monel Lap Joint Flanges, Monel K500 B564 Square Flanges, Alloy K500 ASME B16.47 Tongue & Groove Flanges, Monel® K500 WNRF Flanges Manufacturer, Monel K500 Threaded Flanges, Monel Alloy K500 Screwed Flanges, Monel in Grades K500 JIS, AS, SA, MSS, AFNOR, UNI, GOST, AWWA Flanges Stockyards, Alloy K500 AISI Flanges, Monel K500 DIN Flanges, Monel® Alloy K500 BS Flanges, K500 Alloy EN Flanges Exporters in India, Monel K500 Loose Plate With Weld Neck Flange, Monel K500 Hubbed Slip on Flange, Alloy K500 Plate Slip-On Flanges, Nickel Alloy K500 SB564 Screwed Boss Flange Dealer, Monel K500 Slip-On Boss Flange, ASME SB564 Monel K500 Lapped Pipe End Flanges, ASTM B564 Alloy K500 Raised Face Flanges, Monel® Alloy K500 Hubbed Threaded Flange in Mumbai India.


Domestic Suppliers and Exporters in Cities Like

Madrid, Al Khobar, Moscow, Atyrau, Ahmedabad, Riyadh, Visakhapatnam, Secunderabad, Surat, Rajkot, Ludhiana, Karachi, New York, Faridabad, Noida, Milan, Rio de Janeiro, Bengaluru, Chennai, Port-of-Spain, Granada, Aberdeen, Howrah, Lagos, Jeddah, Mexico City, Dubai, Santiago, Singapore, Dallas, Cairo, Chiyoda, Al Jubail, Navi Mumbai, Hanoi, Sydney, Tehran, Istanbul, Muscat, Kuala Lumpur, Thane, Abu Dhabi, Ernakulam, Kuwait City, Coimbatore, Courbevoie, Ankara, Sharjah, Jaipur, Mumbai, Petaling Jaya, Calgary, Montreal, Ho Chi Minh City, Ranchi, Chandigarh, Vadodara, Lahore, Jamshedpur, Pune, Indore, Dammam, La Victoria, Doha, Kanpur, Edmonton, Thiruvananthapuram, Gurgaon, Jakarta, Nashik, Geoje-si, Ahvaz, Ulsan, Baroda, Houston, Melbourne, Gimhae-si, Brisbane, Seoul, Bhopal, Los Angeles, Hyderabad, Haryana, New Delhi, Kolkata, London, Bogota, Manama, Pimpri-Chinchwad, Caracas, Toronto, Colombo, Perth, Bangkok, Nagpur, Algiers, Vung Tau, Busan, Hong Kong.

International Suppliers and Exporters in Countries Like

Brazil, Belarus, Iran, United States, Indonesia, Mongolia, Germany, Nigeria, Saudi Arabia, Russia, Venezuela, Kenya, Hong Kong, Sweden, Israel, Hungary, Turkey, Colombia, Norway, New Zealand, Jordan, Kuwait, Puerto Rico, Bahrain, Chile, Italy, United Arab Emirates, Bolivia, Trinidad & Tobago,Tunisia, Nepal, Finland, Lebanon, Lithuania, Tibet, Yemen, South Korea, Slovakia, Qatar, Croatia, Vietnam, Sri Lanka, Angola, Azerbaijan, South Africa, Ukraine, Austria, Bangladesh, Chile, Zimbabwe, Namibia, Greece, Bulgaria, Taiwan, Egypt, China, Poland, Canada, Australia, Libya, Poland, Netherlands, Algeria, Philippines, France, Romania, Kazakhstan, Singapore, Iran, Mexico, Mexico, Afghanistan, India, Iraq, Nigeria, Bhutan, Macau, Czech Republic, Thailand, Serbia, Gabon, Costa Rica, Belgium, Denmark, Pakistan, Japan, Morocco, Switzerland, Peru, Ecuador, Portugal, Spain, Estonia, Ghana, United Kingdom, Ireland, Oman, Malaysia, Gambia, Argentina.