Duplex Steel Butt weld Pipe Fittings, Duplex Steel Forged Fittings, Duplex Butt weld Fittings Supplier, ASTM A182 Duplex S32205 High Pressure Forged Fittings, Duplex Steel S31803 Forged Socket weld Fittings Manufactures, Duplex Steel S32205 ASME SA815 Seamless Pipe Fittings Stockist in Mumbai India.
ASME B16.11 Duplex Steel S32205 Forged Elbow, ASTM A815 Duplex Steel S31803 Buttweld Reducer, Duplex Steel in Grades S31803 / S32205 Fittings, Duplex Steel S31803 Threaded Fittings Suppliers, ASME SA182 Duplex Steel S32205 Forged Tee, ANSI B16.9 S31803 Duplex Steel Stub End Exporters.
Being an establish company, Priminox Overseas manufactures Duplex Stainless Steel S31803 / S32205 / 2205 Fittings, which has a mixed ferrite and austenite structure. Duplex Steel S31803 Pipe Fittings provides nearly double the corrosion resistance typical in other austenitic stainless steels. Duplex Steel S31803 Forged Fittings also maintains good weldability in their thickest sections, and they are much more resistant to stress corrosion cracking than standard austenitic steels. Duplex Steel S31803 Forged Socket Weld Fittings has higher strength which is around twice that of Type 304 austenitic stainless steel. Duplex Steel S31803 Forged Threaded Fittings also demonstrates good fatigue strength, as well as outstanding resistance to stress corrosion cracking, crevice, pitting, erosion, and general corrosion in severe environments. Duplex Steel S31803 Butt Weld Fittings provides pitting and crevice corrosion resistance superior to 316L or 317L austenitic stainless steels in almost all corrosive media. It is important to note that Duplex Steel S32205 Butt Weld Pipe Fittings offers much higher levels of corrosion resistance than most other austenitic stainless steels. Duplex Steel S32205 Forged Pipe Fittings describes a family of stainless steels that are neither fully austenitic, like 304 stainless, nor purely ferritic, like 430 stainless. Duplex 2205 Pipe Fittings has high resistance to chloride stress corrosion cracking, along with high resistance to corrosion fatigue and erosion. These Duplex 2205 Forged Fittings is approximately double the yield strength of standard austenitic stainless steel grades.
Duplex Steel UNS S31803 Screwed Fittings, S31803 Duplex Steel Pipe Nipples Stockholders, UNS S32205 Duplex Steel Forged Union Traders, Duplex Steel Werkstoff No 1.4462 Pipe Fittings Suppliers, Duplex Steel S31803 / S32205 Cross, Coupling, Plug, Bushings, Stubends, Inserts, Pipe End Cap, Pipe Bends, End Cap Distributors
Duplex Steel S31803 / S32205 Fittings Specification
Specifications : ASTM A815, A182 / ASME SA815, SA182
Dimensions : ASTM, ASME and API
Standard : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 / ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Size Range : 1/8” NB to 4” NB (Socketweld & Screwed-Threaded) / Seamless 1/2" - 10" , Welded 1/2" - 48"
Type : Socketweld Fittings, Screwed-Threaded Fittings / Seamless / Welded / Fabricated /
Forged Fittings Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Pipe Fittings Thickness : SCH 5S , 10S ,10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS.
Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Grade : Duplex Steel UNS (S31803 / S32205), DIN (1.4462)
Equivalent Grade
STANDARD | UNS | WNR. |
Duplex S31803/S32205 | S31803/S32205 | 1.4462 |
Chemical Composition
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
Duplex s31803 | 0.030 Max | 2.00 Max | 1.00 Max | .030 Max | .020 Max | 22.0-23.0 | 3.00-3.50 | 4.50-6.50 | 0.14-0.20 | Balance |
Duplex S32205 | 0.030 Max | 2.00 Max | 1.00 Max | .030 Max | .020 Max | 21.0-23.0 | 2.50-3.50 | 4.50-6.50 | 0.8-0.20 | 63.54 Min |
Mechanical Properties
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
7.8 g/cm3 | 1350 °C (2460 °F) | Psi – 116000 , MPa – 800 | Psi – 80000 , MPa – 550 | 15 % |
Types of Duplex Steel S31803 / S32205 Forged and Pipe Fittings |
|
Duplex Steel Buttweld Pipe Fittings |
Duplex Steel Forged Socket Weld Fittings |
Duplex Steel Forged Fittings |
Duplex Steel Butt weld Fittings |
Duplex Steel S31803 Pipe Fittings Suppliers |
Duplex Steel S31803 Treaded Fittings Exporters |
ASTM A815 Duplex S32205 Seamless Pipe Fittings |
ASTM A182 Duplex S32205 High Pressure Forged Fittings |
Duplex Steel S31803 Buttweld Pipe Elbow |
Duplex Steel UNS S31803 Forged Tee Dealer |
ANSI B16.9 Duplex S32205 Buttweld Reducer Stockholder |
ANSI B16.11 Duplex S32205 Threaded / Screwed Union |
DIN 1.4462 Duplex Steel Pipe End Cap Manufacturers |
UNS S32205 Duplex Steel Forged Couplings Distributors |
ASME SA815 Duplex Steel S31803 Pipe Nipple Supplier |
ASME SA182 Duplex Steel S31803 Bushings Stockist |
ASME B16.28 Duplex Steel S32205 Lap Joint Stub End |
S32205 Duplex Steel BS 3799 Forged Threaded Hex Plug |
MSS-SP-43 Duplex S31803 Buttweld Reducing Nipple |
S31803 Duplex Steel MSS SP-79 Socket Weld Cross |
Suppliers, Stockist and Distributors of World's Top 10 Manufacturers of Duplex Steel Fittings

Raccortubi

Erne Fittings

Melesi

M.E.G.A

ULMA

TecnoForge

BENKAN

BKL

Lame S.r.l.

Metalfar
Approved in The Following Top Refineries Across The Globe

SABIC (Saudi Arabia)

Aramco (Saudi Arabia)

ALBA (Saudi Arabia)

QAFCO (Qatar)

MAADEN Saudi Arabia)

KNPC (Kuwait)

KOC (Kuwait)

Qatar Petroleum (Qatar)

PDO (Oman)

ADNCO (U.A.E.)

ORPIC (Oman)

Takreer (Abu Dhabi)

YASREF (Saudi Arabia)

PetroBras (Brazil)

PETRONAS (Malaysia)

NIOC (Iran)

NPDC (Nigeria)

EGPC (Egypt)
People Searched For
Duplex Steel S31803 / S32205 Forged and Pipe Fittings
Duplex Steel Buttweld Pipe Fittings, Duplex Steel Forged Socket Weld Fittings, Duplex Buttweld Fittings, Duplex Steel S31803 Forged Fittings, Duplex S32205 Pipe Fittings Manufacturers in Mumbai, UNS S31803 Duplex Steel Seamless Pipe Fittings, Duplex Steel A182 S31803 High Pressure Forged Fittings, Duplex Steel UNS S32205 Forged Elbow, Duplex Steel S31803 Radius 1D, 2D, 3D, 5D, 6D, 8D, 10D Pipe Bend, S32205 Duplex Steel 45° Elbow Traders, Duplex S31803 / S32205 Long Radius Elbow, DIN 1.4462 Duplex Steel Short Radius Elbow Supplier, S31803 Duplex Steel Socket Weld 90 Deg Elbow, ASME 16.11 Duplex Steel S32205 Screwed 45 Degree Elbow, Duplex Steel S31803 Threaded / Screwed Union Stockist, Duplex Steel S32205 Fittings Supplier, Duplex Steel S31803 Forged Tee Dealers, S31803 Duplex Steel Reducing Tee Exporters in India, ASTM A182 S32205 Duplex Steel Equal Tee Stockist, ASME SA815 Duplex Steel S31803 Unequal Tee Suppliers in Maharashtra, ANSI B16.9 Duplex Steel S32205 Butt weld Reducer, S31803 Duplex Steel Concentric Reducer Wholesalers, ASTM A815 S32205 Duplex Eccentric Reducer Stockist, Duplex Steel S31803 ASME B16.28 Stub Ends Stockholders, MSS SP-79 Duplex Steel S32205 Threaded Cross Distributors, ASME SA815 Duplex Steel S31803 Reducing Cross, Duplex Steel S32205 ASTM A815 End Cap Exporter, S31803 Duplex Steel Screwed Barrel Nipple, Duplex Steel S32205 ASTM A182 Forged Caps, Duplex Steel S31803 Socket Weld Half Coupling, Duplex Steel S32205 BS 3799 Threaded Half Coupling Manufacturer, Duplex Steel S31803 Full Coupling, Duplex Steel S32205 Threaded / Screwed Bushing, MSS-SP-43 Duplex Steel S31803 Butt weld Pipe Nipple, Duplex Steel S32205 SA182 Hex Nipples Stockyards, Duplex Steel S31803 Swage Nipple, ASME SA182 Duplex S32205 Screwed Hex Plug, Duplex Steel S31803 MSS SP-95 Square Plug in Mumbai India.